Loa trần gắn nổi TOA PC-2268WP
Mã SKU: TOA92
Mã hàng : PC-2268WP
Bảo hành : 12 tháng
Tình trạng : Còn hàng
Xuất xứ: Indonesia Mô tả sản phẩm:
Mã hàng : PC-2268WP
Bảo hành : 12 tháng
Tình trạng : Còn hàng
Xuất xứ: Indonesia Mô tả sản phẩm:
1.162.920 VND
Số lượng
Tư vấn & Báo giá
Hướng dẫn mua hàng
Phương thức thanh toánLoa trần gắn nổi TOA PC-2268WP
Loa trần gắn nổi TOA PC-2268WP là loa điện động 12cm gắn nổi trên bề mặt trần. Dễ dàng lắp đặt nhờ lò xo có móc gài. Đầu nối có thể ghép nhiều loa với nhau.
Tính năng sản phẩm : Loa trần gắn nổi TOA PC-2268WP
- The PC-2268WP is a splash-proof surface mount ceiling speaker with rated input of 6 W (100 V line application). It meets IPX4 water protection requirements and can be installed in locations where it may not be directly exposed to wind and rain. Compact and attractive design to blend in with interior spaces. The push-in type input terminal provides an easy cable connection and allows bridge wiring. The input power change can be made easily by changing the tap position of the transformer. Rear-closed structure with a rear cover keeps performance and sound quality constant regardless of installation location.
Thông số kỹ thuật : Loa trần gắn nổi TOA PC-2268WP
- Rated Input: 6 W (for 100 V line), 3 W (for 70 V line)
- Rated Impedance 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 6.7 kΩ (1.5 W), 13 kΩ (0.8 W)
- 70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 6.7 kΩ (0.8 W), 13 kΩ (0.4 W)
- Sensitivity: 90 dB (1 W, 1 m, 330 Hz - 3.3 kHz, pink noise)
- Frequency Response: 160 Hz - 16 kHz (20 dB below peak)
- Speaker Component: 12 cm (5") cone-type
- Applicable Cable: 600 V vinyl-insulated cable (IV wire or HIV wire) Solid copper wire: φ0.8 - φ1.6 mm (equivalent to AWG 20 - 14)7-core twisted copper wire: 0.75 - 1.25 m㎡ (equivalent to AWG 18 - 16)
- Connection: Push-in connector (bridging terminal)
- Operating Temperature: -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F)
- Water Protection: IPX4 (conforms when the unit is installed to a flat horizontal ceiling.)
- Finish: Front case, Rear case: Fire-resistant HIPS resin (resin material grade: UL94V-0), light gray Speaker mounting bracket: Surface-treated steel plate, off-white, powder coating
- Dimensions: φ220 × 80.5 (D) mm (φ8.66" × 3.17") (unit only, excluding projection) φ150 × 5 (D) mm (φ5.91" × 0.2") (speaker mounting panel, excluding mounting screw)
- Weight: 890 g (1.96 lb) (unit only), 180 g (0.4 lb) (speaker mounting panel)
- Accessory: Speaker mounting panel …1, Switch box mounting screw (M4 × 35) …2,Ceiling mounting screw (4 × 35) …2, Knob nut …2
