Bộ điều khiển đầu vào TOA SX-2000CI

Mã sản phẩm : TOA422
Model : SX-2000CI
Bảo hành : 12 tháng
Hãng : TOA
Tình trạng : Còn hàng

Giá : Liên hệ

Miêu tả chi tiết

The SX-2000CI is a control input of the matrix system and can be mounted in an EIA equipment rack (1 U size).

Thông tin sản phẩm : Bộ điều khiển đầu vào TOA SX-2000CI

The SX-2000CI is a control input of the matrix system and can be mounted in an EIA equipment rack (1 U size). Multiple units can be decentralized in a whole system. It is equipped with 32 control input channels. Control input line failure can be detected by connecting resistors to its line. The indicators on the front panel monitor the control input line status. The SX-2000CI has a function to supply a stabilized 24 V DC. The SX-2000CI has two power inputs and can support a dual-redundant power supply system. By using a stand-alone mode, system can be configured with only the SX-2000CI, SX-2000CO Control output unit and the power supply unit, permitting the contact data of multiple channels to be transmitted to the remote locations with simple wiring.

When operating in matrix mode

Power Source	Usable power supply unit: AD-011, AD-031B 24 V DC (operational range: 20 V - 40 V DC) Two power inputs construction enables dual-redundant power supply.
Current Consumption	0.7 A or less (maximum value in the power operating range) 0.55 A or less (when operated on 24 V DC)
Indication	Control input indicator (32), Power indicator, CPU OFF indicator, FAULT indicator
Control Input	32 inputs, no-voltage make contact input, open voltage: 24 V DC, short-circuit current: 2 mA, photo coupler input, removable terminal block (16 pins)
Surveillance Section for The Control Input Lines	Connection resistance to make the function inactive: 20 kΩ ±5 % Connection resistance to make the function active: 10 kΩ ±5 % Connector cable: Twisted pair cable (shielded type is recommended) Maximum cable distance: 10 m (32.81 ft)